User manual

Managing System and Station Security
60 Wavion
Modifiable fields on this page are indicated in the table.
Configuring RADIUS Server Parameters: Server Manager Tab
The Server Manager tab allows you to configure parameters for the RADIUS server.
To view and configure the Radius Server pages
• Click SSID-VLAN, either from the Security page, or from the menu bar, as a sub-menu
under the Security item.
• Choose WPA Radius from the Authentication drop down menu to open the Radius Servers
configuration.
Make changes as needed.
Re-Keying Method For WPA SSIDs, the administrator
determines if and how often re-keying to
broadcast keys occurs.
• Disabled – no re-keying
• Time Based – re-keying after a certain
time
• Packet Counter Based – re-keying when
group (broadcast) packet counter
reaches a certain level
(modifiable field)
Timeout (seconds) After this timeout, re-keying occurs if re-
keying method is 'Time Based'
(modifiable field)
Packet Threshold Group broadcast packets' threshold after
which re-keying occurs if the method is
'Packet Counter Based'; the value is
inserted as multiplication of 1000 packets
Re-Keying on
membership termination
Indicates whether a group key re-keying
occurs when a client is disassociated from
the group.
Options
Apply Click to have changes take effect
temporarily
Save (from the menu) Click to have changes made on this page
remain even after a reboot.
Cancel Click to clear changes made; Cancel only
works on changes where neither Save or
Apply was clicked
Table 6.3. Authentication tab
Field Description