User manual

Viewing Associated Stations
Rev 1.1.0 User Manual 49
Time since first packet is
pending if station is in
Doze mode
If station is in Power Save mode, the
amount of time for which the first packet
received is waiting to be delivered
Last Activity Number of minutes since the station was
last active.
Inactivity Timeout If a station is not active for this number of
minutes, the AP will de-authenticate it due
to inactivity.
RF Switching Related
Information
Click + sign to display this information/
click - sign to hide
Rate being used in RTS
Transmission
The PHY rate (modulation) that the AP
uses for transmission of Self-CTS and RTS
transmissions to the client.
Beamforming
Transmission related
parameters:
Transmission Rate[Mbps] The PHY rate (modulation) that is used in
Beamforming transmission to this client.
RSSI[dBm] RSSI -- Received Signal Strength
Indication as the client is received by the
AP.
SNR[dB] SNR -- Signal to Noise Ratio (dB) as the
client is received by the AP.
BRE parameters:
Transmission Rate
BRE - Broadcast Range Enhancement. The
PHY rate (modulation) in which the AP
broadcasts are being transmitted.
RF Switching Related
Statistics
Click + sign to display this information/
click - sign to hide
Type of Transmission of
the Station
• Negotiation
• BRE
• Single beam (beamforming)
For each of the AP’s transmission types to
the station, the following transmission
statistics are displayed:
Failure (packets) Number of packets that failed to be
transmitted. This number only applies to
to Negotiation and Single Beam
(beamforming) transmissions and are
those which did not receive an ACK
response.
Table 5.4. Station Detailed Information tab
Field Description