User manual

Managing Network Interfaces
Rev 1.1.0 User Manual 33
Duplex Indicates whether transmission through
the interface is full duplex or half duplex
Auto Nego If True, the link is set to auto-negotiation
of the transmission rate, if not, the rate is
statically set to a specific rate (10 or 100
Mbps)
Default VLAN Default VLAN of this interface, when
working in VLAN mode
Last Interface Change Total time since last interface change
Statistics Total amount in Transmission and
Reception of the following parameters
Bits The total number of bits transmitted/
received.
Bytes The total number of bytes transmitted/
received.
Unicast Packets The total number of Unicast packets
transmitted/received.
Non-Unicast Packets The total number of Non-Unicast packets
transmitted/received.
Errors The total number of errors that occurred
during transmission/reception.
Discarded The total number of packets that were
discarded during transmission/reception.
Options
Apply Click to have your changes take effect
temporarily
Save Click to have your changes remain in
effect after a reboot
Cancel Click to clear your changes; this is only
possible if Apply or Save were not clicked
Table 4.2. Ethernet page
Field Description