User manual

Managing Network Interfaces
Rev 1.1.0 User Manual 31
The following fields appear on the Network Interfaces Summary page:
You can click Ethernet or Switched 802.11b/g on either the page or the menu bar to view
the Ethernet or Wireless Interface pages.
Table 4.1. Network Interfaces Summary page
Field Description
Interface Name List of network interfaces
Speed Maximum transmission rate on the
interface in Mbps
Status Indicates whether interface is up or down
Transmission (bytes) Current total transmission in bytes
through the interface
Reception (bytes) Current total reception in bytes through
the interface
Bridge Configuration For each EtherType that is valid in this
table, the 802.1H bridge tunnel
encapsulation format is used. Otherwise,
RFC1042 applies.
Options
Apply Click to have your changes take effect
temporarily
Save Click to have your changes remain in
effect after a reboot
Cancel Click to clear your changes; this is only
possible if Apply or Save were not clicked