User manual

Managing the System Configuration
26 Wavion
The following fields appear on the System Configuration tab:
You have the option of exporting the current startup configuration, importing a new startup
configuration or of restoring the factory default configuration file.
Table 3.3. System Configuration tab
Field Description
Current Configuration
File
Current Startup
Configuration File
File currently used to configure system on
startup. This field is also used to export
the current configuration file. Right-
clicking on the file name alllows you to
save the current Startup Configuration File
on you local disk. See Exporting the
Current Startup Configuration File on
page 27
Import New
Configuration File
To import a saved configuration file
Import Protocol TFTP/
HTTP
Configuration file can be imported using
either TFTP or HTTP protocols
TFTP Server – IP
Address...
IP address of the TFTP server, if, for the
current downloading, it is not the same as
the default TFTP Server. Setting the value
here is only relevant for this download,
and does not hold across a Reboot.
The Default TFTP Server is set in the
System Configuration page. See System
Configuration Page on page 18.
New Startup
Configuration File
Path including the .swcc file being HTTP
downloaded; select path using the Browse
button which is activated if HTTP is
selected as the import protocol
Options
Factory Defaults Used to restore the factory default startup
configuration. Clicking here erases the
configuration file that contains all the
changes you made to the unit except the
unit’s IP address. See Restore to the
Factory Default Configuration File on
page 27.
Import System
Configuration
Used to import a new startup configuration
from a previously saved file.
See Importing a New System
Configuration File on page 27