User manual

Managing the System Configuration
Rev 1.1.0 User Manual 23
Upgrade System
Software Path/File (TFTP
download)
Path to the .wj file being TFTP downloaded
Upgrade System
Software Path/File (HTTP
upload)
Path including the .wj file being HTTP
downloaded; select path using the Browse
button which is activated if HTTP is
selected as the upgrade protocol
Options
Default Returns the system to the factory default
software version, and erases the following
details:
• Current configuration file
• Current IP setting - leaving the system
with Default IP: 192.168.1.1 mask:
255.255.255.0
• Current software version.
See Returning to the Default Software
Version on page 24.
Upgrade Used to install a new software version.
See Upgrading the System Software on
page 82.
Backup Backs up the current version on the unit
itself. See Backing Up the Current
Software Version on page 24.
Restore Restores the version that was previously
backed up. See Restoring the Last Saved
Software Version on page 25.
Table 3.2. Software Upgrade tab
Field Description