User manual

Managing the System Configuration
Rev 1.1.0 User Manual 19
The following fields appear on the System Configuration page:
Table 3.1. System Configuration page
Field Description
System Identity
System Description Description of the device as written in
MIB-II SysDescr OID
System Up Time Total time since system was switched on
or last re-initialized
System Contact Email address of system operator
System Name Administratively-assigned name for this
managed node; the node's fully-qualified
domain name.
System Location Physical location of this node
(e.g.,`telephone closet, 3rd floor')
Current IP
Configuration
Current IP Address IP address of the unit
Current Subnet Mask Broadcast domain for subnetwork
Current Default Gateway The IP address of the default Gateway.
This address is necessary to contact the
WS410 from a remote server.
Configured IP
Configuration
Configured Boot Protocol
• Select DHCP for automatic assignment of
IP address from a DHCP server
• Select Static to configure IP address
manually
Configured IP Address 192.168.1.1 is the default unit’s IP
address
Configured Subnet Mask 255.255.255.0 is the default subnet mask
Configured Default
Gateway
Default Gateway to be used if forwarding
IP address is not in the current
subnetwork. Default is blank. This address
is necessary to contact the WS410 from a
remote server.
Configure TFTP Server
IP Address of TFTP
Server
The IP address of the default TFTP server;
can be overridden in the Software Upgrade
page for a temporary SW download