User manual

Using the WS410 Web-based Management Interface
14 Wavion
Again see the indication on the web browser that the request is being processed in the same
way as described for the Apply button. It is necessary to let this cycle complete before doing
anything else.
If necessary, reboot the WS410 either by power-cycling the unit, or by clicking Reboot at the
bottom of the System window.
Clearing Changes
When making changes, you may decide that you need to return the page to its previous
state. This can be done by clicking Cancel.
Using Other Available Options
There are other options available on the WS410 pages. In general, these buttons are specific
to the pages where they appear and are described on the relevant pages.
NOTE: The red warning message does not go away when Save is pressed. A
reboot of the system is still required.
NOTE: Cancel only works until the point when you click Apply. Once you click
Apply, in order to change back, you must re-enter the previous data
manually. Alternatively, you can reboot the system without clicking Save.