Instruction manual

WBSn-2400 Quick Start Guide Page 10
2. A log-in screen is displayed.
a. Enter admin in the User Name field.
b. Enter admin in the password field.
c. Specify the language in which you wish to work.
(Note: This field will be fully functional in a future release.)
d. Click Connect. The Wavion EMS screen is displayed.
3. Proceed to the IP Management section.
Configuration Features
IP Management
In the GUI, use the System page to set up, configure and manage your IP. This page displays basic static
information on the system, including contact details, and IP addresses. Default values and details are
provided, which should be modified, by specifying parameter values according to your network system and
requirements.
Management IP address
1. Navigate to Configuration => Network => IP Configuration, select the line you wish to update
and click Edit.
2. In the popup window, modify the default IP address values provided:
Parameter Description
IP Address Change the default IP address
IP Method Select either Manual or DHCP
Mask Enter the required network mask
Gateway Specify the gateway for the Management IP address
MTU Maximum Transmission Unit
3. Click Apply, at the bottom of the Wavion EMS screen.
4. Navigate to Configuration => System => Management IP Address, and modify the default
values provided.
5. Select the required VLAN to be used for management purposes, from the list of available VLANs.