User manual

Managing System and Station Security
Rev 4.0 User Manual 94
Table- 6.2 Management Configuration page
Field Description
HTTP/CLI Users
Use to change password or add new users to manage the unit; see
below
User Name
When registering a new user, enter user name; user name is case
sensitive
User Type
User type is selected when registering a new user
Administrator/Viewer
New Password
Use this field to insert new user's password or to change existing
password
Confirm Password
When registering a new user, or changing a password, re-enter the
above password to verify that the password is correct.
Options Click buttons in this section with respect to new and current users
Apply Click to have changes take effect temporarily
Save (on menu bar)
Click to have changes made on this page remain even after a
reboot
Cancel
Click to clear changes made; Cancel only works on changes where
neither Save or Apply was clicked
SNMP Configuration
SNMP Enabled If checkbox is marked, indicates that SNMP is enabled
SNMP Version (V2 or V3) Lists SNMP version
SNMP Read Community
SNMP Write Community
SNMP Read and Write community strings authenticate access to
MIB objects and function as embedded passwords
Options
Click buttons in this section with respect to changes made in the
SNMP section
Apply Click to have changes take effect temporarily
Save (on menu bar)
Click to have changes made on this page remain even after a
reboot
Cancel
Click to clear changes made; Cancel only works on changes where
neither Save or Apply was clicked