User manual

Viewing Associated Stations
Rev 4.0 User Manual 88
Table- 5.4 Station Detailed Information tab
Field Description
Station Identity
Station Association ID
The Association ID (AID) that the client got when its association to
the BST was completed.
Station MAC Address MAC (Media Access Control) address of the associated station.
Station's Detailed
Information
Retry Limit Reached Counter
This counter increment every time the Retry Counter (below)
reaches its limit (64).
Retry Counter A counter of the retransmissions to this associated station.
Station's Listen Interval
The listen interval of the client specified during association to the
BST.
Time since first packet is
pending if station is in Doze
mode
If station is in Power Save mode, the amount of time for which the
first packet received is waiting to be delivered
Last Activity Number of minutes since the station was last active.
Inactivity Timeout
If a station is not active for this number of minutes, the BST will
de-authenticate it due to inactivity.
RF Switching Related
Information
Click + sign to display this information/ click - sign to hide
RX Rate
PHY Rate (modulation) at which the associated station currently
transmits to the base station
Rate being used in RTS
Transmission
The PHY rate (modulation) that the BST uses for transmission of
Self-CTS and RTS transmissions to the client.
Beamforming Transmission
related parameters:
Transmission Rate[Mbps]
The PHY rate (modulation) that is used in Beamforming
transmission to this client.
RSSI[dBm]
RSSI -- Received Signal Strength Indication as the client is received
by the BST.
SNR[dB]
SNR -- Signal to Noise Ratio (dB) as the client is received by the
BST.
BRE parameters:
Transmission Rate
BRE - Broadcast Range Enhancement. The PHY rate (modulation)
in which the BST broadcasts are being transmitted.