User manual

Viewing Associated Stations
Rev 4.0 User Manual 84
version 3.2.2, and Ruckus running version 4.4.2.0.28.
Tx Rate [Mbps]
PHY Rate (modulation) at which the base station currently
transmits to the associated station
Rx Rate [Mbps]
PHY Rate (modulation) at which the associated station
currently transmits to the base station
SSID SSID to which the associated station is associated
VLAN VLAN name to which the station is bound.
Tx[Bytes] Number of bytes transmitted by BST to the station
Rx[Bytes] Number of bytes received by the BST from the station
RSSI[dBm]
The Received Signal Strength Indicator power received by the
BST from the associated station.
State State of which the station is connected
Reset Counters Reset the Tx and Rx bytes counters
Add to white list
When MAC filtering is active, adds the specific station to a list
of accepted clients.
Viewing Specific Stations
You can view detailed information about a specific station.
To view detailed information about a specific station
• In the Associated Stations summary page, click the Station’s MAC Address for the specific
station.
The Station Information tab is displayed for the associated station.
Figure 5.3 Station Information tab
The following information is displayed under the Station Information tab: