User manual

SSID and VLAN configuration
Rev 4.0 User Manual 72
Table- 4.4 Editing SSID Page
Field Description
• DSCP: Uses RFC4594
• TOS: Uses IP precedence
Custom: User configuration of the DSCP field
Related VLAN
VLAN: VLAN-
0_Name_External-ID-1
Default VLAN name
Rename VLAN Option to rename VLAN name for identification.
VLAN External ID
Configured VLAN number as configured on the backhaul LAN
switch
VLAN Enabled
Enabled for the Primary SSID. Configurable for additional VLAN
and SSID
Ethernet Tagging Enabled
Indicates whether 802.1q tagging is applied for this VLAN when
used on the Ethernet interface.
Default for SSID/BSSID
In case there are few VLAN per SSID (applicable when the SSID
is RADIUS Authenticated, and the RADIUS can determine which
VLAN a client belong to), this marks which VLAN is the default
VLAN for the SSID.
Options
Apply Click to have your changes take effect temporarily
Save (from the menu) Click to have your changes remain in effect after a reboot
Cancel
Click to clear your changes; this is only possible if Apply or Save
were not clicked
Security Configuration
After editing the SSID, the security must be set. The following pages describe the process to set
several security configurations. Pictures and indications refer to SSID mode. The process in
BSSID mode is the same.
Configuring WEP Security
To configure WEP Security pages