User manual

SSID and VLAN configuration
71 Wavion
Table- 4.4 Editing SSID Page
Field Description
Identity
Rename SSID/BSSID
'Wavion' is the default SSID. Set new name for the SSID; the
SSID is case-sensitive, and shorter than 32 characters
SSID/BSSID Index It's a chronological numbering for the SSID Table
BSSID MAC address attached to the SSID (only in BSSID mode)
SSID/BSSID Enabled
SSID #1 is always Enabled. SSID that are not enabled cannot be
accessed from the wireless interface.
Backhaul SSID/BSSID
Check to enable the SSID/BSSID as a backhaul SSID. The VLAN
configured won’t be used at the Ethernet side.
Trunked VLAN must be configured in different SSID/BSSID that
won’t be enabled (the VLAN must be enabled).
Security Configuration
Authentication Open System
Shared Key
Open System + Shared Key
WPA PSK
WPA Radius
WPA2-PSK
WPA2-Radius
WPA2 mixed mode PSK
WPA2 mixed mode Radius
WPA2 mixed mode PSK + Radius
Encryption None
WEP/40
WEP/104
TKIP
TKIP+WEP/40
TKIP+WEP/104
AES
AES + TKIP
Exclude Unencrypted
When this checkbox is marked, the BST drops incoming packets
that are unencrypted.
QoS Packets Priority
Choose the type of marking to be used when prioritizing data.
• VLAN: Uses 802.1p priority tag.