User manual

Managing Network Interfaces
Rev 4.0 User Manual 54
Figure 3.12 Self Backhaul Configuration page - Central
1. Apply and save changes
2. Reboot the system.
Table- 3.9 Self Backhaul configuration - Central
Field Description
Logical Network ID A name that describe the network name
(Suggestion: Enter the name of your company or ISP )
Cluster ID A name that describes the cluster of BST.
(Suggestion :Enter the name of the Central BST, or the BST that is
connected to the GW of the network)
PtMP SBH Operation The default mode is Auto
Normal mode is to fine-tuning Point-to-Point Backhaul
Aggressive mode is to fine-tuning Point-to-MultiPoint Backhaul
After you perform all of the above steps the BST should be connected wirelessly via the Wavion
Self-Backhaul link.