User manual

Managing Network Interfaces
Rev 4.0 User Manual 48
1. Select an SSID
2. Set the SSID as Backhaul SSID by checking the “Backhaul SSID” checkbox.
Please pay attention that the Authentication settings will change automatically to WPA2 PSK and
the Encryption to AES. Please choose a pass phrase for authentication.
QoS priority will be performed only according to 802.1p, so all the other QoS types (TOS, DSCP,
Custom) are not shown.
The VLAN set in the SSID is not used at the network side. This VLAN helps to transport all the
VLAN that exist on the backbone over the air.