User manual

Managing Network Interfaces
41 Wavion
Table- 3.5 Wireless Activity page
Field Description
Total Tx capacity
The calculated average throughput that was achieved (in Kbps)
since the last screen refresh.
Estimated WBS capacity
available
The estimated available throughput based on parameters of last
transmissions, SDMA activity and channel parameters. When the
throughput in last transmission and SDMA activity is near zero ,
the field shows the maximum available throughput :
◊ When SDMA is disabled: 29593 kbps.
◊ When SDMA is enabled: 51200 kbps
Statistics
Total amount in Transmission and Reception of the following
parameters
Bits The number of bits transmitted/received.
Bytes The number of bytes transmitted/received.
Unicast Packets The number of Unicast Packets transmitted/received.
Non-Unicast Packets The number of Non-Unicast Packets transmitted/received.
Errors
The number of errors that occurred during
transmission/reception.
Discarded
The number of discards that occurred during
transmission/reception.
Reset Counters Button
Resets the counters. In order to see new numbers refresh the
page.
Options
Apply Click to have your changes take effect temporarily
Save (from the menu
bar)
Click to have your changes remain in effect after a reboot
Cancel
Click to clear your changes; this is only possible if Apply or Save
were not clicked