User manual

Managing the System Configuration
Rev 4.0 User Manual 22
Table- 2.2 System Configuration tab
Field Description
Current
Configuration File
Current Startup
Configuration File
File currently used to configure system on startup. This field is
also used to export the current configuration file. Right-
clicking on the file name allows you to save the current
Startup Configuration File on you local disk. See Exporting the
Current startup Configuration File.
Import New
Configuration File
To import a saved configuration file
Import Protocol
TFTP/HTTP
Configuration file can be imported using either TFTP or HTTP
protocols
TFTP Server - IP
Address...
IP address of the TFTP server, if, for the current downloading,
it is not the same as the default TFTP Server. Setting the
value here is only relevant for this download and does not
hold across a Reboot.
The Default TFTP Server is set in the System Configuration
page. See Viewing the system Configuration
New Startup
Configuration File
Path including the .swcc file being HTTP downloaded; select
path using the Browse button which is activated if HTTP is
selected as the import protocol
Factory Defaults
Used to restore the factory default startup configuration.
Clicking here erases the configuration file that contains all the
changes you made to the unit except the unit's IP address.
See Restore the Factory defaults
Import System
Configuration
Used to import a new startup configuration from a previously
saved file.
See Importing a New System Configuration file
You have the option of exporting the current startup configuration, importing a new startup
configuration or of restoring the factory default configuration file.
Exporting the Current Startup Configuration File
To export the current system configuration
1. Click on the name of the current software configuration.
A File Download dialog box will appear listing the Name, Type, and From IP address.
A File Download dialog box will appear listing the Name, Type, and From IP address.