User manual

Appendix: Troubleshooting
Rev 4.0 User Manual
114
Problem Solution
BST
• Check for Line of Sight
Link is Good but no data traffic
• Check that Passphrase is the same for both BST
in case of problems raising cluster
links due to low SNR of the SBH links
(from the sub-scan)
Try to set a different channel of the Central-BST
LED Description
AE Models
LED name Status Description
OFF No Ethernet Activity on port A ETH A
BLINK Ethernet Activity on port A
OFF No Ethernet Activity on port B ETH B
BLINK Ethernet Activity on port B
GREEN, SLOW_BLINK Initialization state
RED,STEADY
Critical alert
GREEN, SLOW_BLINK Operational without connected stations
GREEN, STEADY Operational with connected stations
AMBER, FAST_BLINK Operational GENERAL_WARNING
AMBER, SLOW_BLINK
Software RESET
STATUS
AMBER,STEADY
Hardware RESET