User manual

Upgrading the System Software
Rev 4.0 User Manual
106
Firmware Upgrade Procedure
Note: To better reflect the value of Wavion products we are changing the
name of our product family from Access Points (AP) to Wireless Base
Stations (WBS), consequently the existing WS-410 product name will be
changed to Wavion WBS-2400.
The new product name emphasizes the difference in architecture
(Multiple Radio system) and the value to customer, superiority in
performance (coverage, capacity, indoor penetration and immunity to
interference) of Wavion WiFi base station over any other standard
outdoor WiFi access point products available in the market.
.
Note: All references in Wavion's documentation to WS-410 refer also to
the WBS-2400, and vice versa. Both products are exactly the same
except for the name change
Firmware upgrade can be performed using a HTTP web browser or TFTP application. Before
performing the upgrade procedure, make sure you have the appropriate files on your computer,
as listed in the next table:
Table- 8.1 WBS-2400 Firmware Files
Unit name Firmware Filename
WBS-2400
W2400_T_v_4_0_1_rev_7.wj
WBS-2400-SCT
W2400_SCT_T_v_4_0_1_rev_7.wj