Specifications

It is Recommended that you save the Database “Before and After” you have finished Programming the SPS-5 v9.
See Fig. 19
Fig. 19 (Click on “Files” and then Click “Save As” and name your file)…For Both v9 Series Paging Systems
Important NOTE…The Software isn’t able to know which Model System the “Saved File” is for.
You may wish to “Save” in a Fashion to “Notate” which System Model the “File” is for.
Examples:
For the v9 Dual Com Port System, Save File as: NorthDallasHosp_v9.pg9
Or
For the v9S Single Com Port System, Save File as: NorthDallasHosp_v9S.pg9
The “.pg9” will automatically be attached to the file name or you may also add it to the file name yourself.
Recommendation
After “Reading” the System for the First Time and Before you Edit the Configuration: “Save the Database”.
You could name it “Default” or “Base” or a name of your preference.
This would give you a “Base Configuration” to fall back on in case you ever need the “Original” Database and Settings.
After making your changes and you have “Programmed” the New Information into the Database, “Save” your completed
work as a Different name, (maybe for that particular job location as shown in the examples above).
You may have another Install that would be very similar to this one and you could simply “Download the Saved File” to
the New Paging System (Make Sure that you “Match” the System Models).
For Testing the Encoder: (See Next Page).