Specifications

Encoder Software Main Screen – Open Com Port
On the Main Screen of Encoder Setup Program, Click on the “Open Com (X)” Button next to the RED Light.
See Fig. 3
Fig. 3 (Open the Com Port, Part 1)…Click the “Open Com 2” to Open the Com Port.
The Software will detect the SPS-5 v9 or the v9S Paging System and Open the Com Port and the Light will turn Green.
See Fig. 4 (Part 2) and 4A (Part 2A)
Fig. 4 (Open the Com Port, Part 2)…Dual Port Identification – Firmware Version: 9.04 or…
Fig. 4A (Open the Com Port, Part 2A)… Single Port Identification – Firmware Version: 9.04S