Specifications

Encoder Setup Software Programming Guide
Getting Started
Insert the “Product Support CD” into a Laptop or Desktop.
Install the Encoder Setup v9 Program Software.
The v9 Encoder Software has the ability to work with all Versions of the v9 Paging Systems, including V9, V9S, and V9E.
Attach the paging system using the supplied Standard RS-232 serial cable to your selected Com Port.
The SPS-5 v9 or the v9S will be Auto-Detected by the Encoder Setup Software, when you “Open” the Com Port.
Encoder Software Main Screen – Setup the Com Port to be used
Start the SPS-5 v9 Encoder Setup Program and Click on the “Com Port” Button in the Menu and Click on “Properties”.
See Fig. 1
Fig. 1 (Choose the Com Port, Part 1) If the Com Port Number is Wrong, Click “Properties” to Choose Port.
Com Port Settings Screen
Edit the “Com Port” and Settings and Click “OK”.
See Fig. 2
Fig. 2 (Choose the Com Port, Part 2)
Encoder Software Main Screen – Open Com Port
On the Main Screen of Encoder Setup Program, Click on the “Open Com (X)” Button next to the RED Light.