Data Sheet

Europe, Australasia and Middle East – Corporate Office USA, Canada and South America South Africa
[phone] [phone] [phone]
Personnel Tag
TGP-A
The TGP-A Personnel Tag is generally used
for security & safety applications requiring
people to carry a tag. The housing
incorporates a clip-slot for convenient
wearing for that purpose. However, it may
be used in other applications such as asset
monitoring. The mounting and affixing
method for the tag depends on the type of
application it is used in. The tag must not be
fixed directly onto metal surfaces.
The TGP-A-DT tag is a ‘dual technology’ tag
that incorporates a customer supplied
passive RFID PET e.g. the HID MicroProx
TM
chip, allowing the tag to function on other
passive RFID systems such as a door
access control system.
Model Range
The tags can be ordered using the part
numbers listed below:
L-Series
TGP-A : Standard tag
TGP-A-G2 : With UHF Gen2 Inlay
TGP-A-DT : With HID Inlay
Air Interface Protocols
L-Series’ refers to a proprietary
communication protocol used between
Wavetrend
®
tags and readers.
L-Series tags provide ultra long read range
and are ideal for use in low tag density (< 30
tags per reader) operations such as
personnel tracking, small asset
management applications and access
control systems.
Multiple classes, allowing the user to
select shorter messaging packets for high
speed or high density application
Typical Applications
Specifications
Environmental
Operating temperature
Storage temperature
Humidity
: -30°C to +60°C
: -40°C to +70°C
: 5% to 90% (non-condensing)
Physical
Size
Weight
Colour
Material
: 85 x 54 x 6.5 mm
: 24 grams
:
:ABS (ultrasonically sealed) IP64
Radio Frequency
Transmit Frequency
Power Output (avg.)
Range
: 433.92 MHz
: 77 dB
V/m @ 3m
: 1 to 100+ meters (actual range is determined by the
choice of reader & antenna used to detect the tag and
the environment it is used in)
Electrical
Power
: Internally powered by lithium battery
accessories
TA501
TA501-AT
(All sold in packs of 10)
: Tag attachment kit
: Tamper alerting tag attachment kit
User definable data fields, allowing up
to 200 characters of user data to be
stored on the tag
Smart telemetry tag, that alert and log
the user if out of bounds conditions in
either temperature or humidity occur
Greater selection of tag beacon rates
offering greater tag of
the reduction in
spurious transmissions.
L-Series+ tags can only be read by L-Series+
readers. L-Series readers can read both L-
Series and L-Series+ tags.
* (from front page) Battery life calculations assume
operation at room temperature with the default
status transmission interval of 15 seconds, without
the anti-tamper circuit armed and without a motion
sensor fitted
Ordering & Further Information
For more information on purchasing the
Active TGP-A Tag please email
Wavetrend’s Sales team:
[e-mail]
For more information on Wavetrend
®
visit
our website.
FCC Statement of Conformity
Wavetrend , TGP-A Active Duo ,
FCC ID: 06XTGP-A
This device complies with Part 15 of the FCC rules subject to the following three conditions:
1) This device may not cause harmful interference.
2) This device must accept all interference received, including interference that may cause
undesired operation.
3)
This device is for commercial use only and intended for use in a confined area with an
appropriate system receiver
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.