User Manual

USER MANUAL –Active RFID Tags
Document No.
Configuration No.
Wavetrend Technologies Ltd
Issue Date
Page
25042002 REV 2.3 User Manual 25
TH
APRIL 2012 3 OF 30
IMPORTANT NOTICE TO THE READER
Each of Wavetrend
®
’s ActivDuo active RFID tags have been specifically designed to operate in specific
circumstances or applications and be attached to specific types of items in a specific manner. Failure to
follow the guidelines and application notes contained in this manual for each tag listed can lead to their
incorrect operation and failure to perform as expected or intended. The choice of which Wavetrend
®
tags to
use in any project must be made by a fully trained and Wavetrend
®
certified engineer. Wavetrend
®
accepts
no responsibility for any failure of the product in any way caused by the incorrect selection, installation and
usage of Wavetrend
®
’s active RFID tags, readers, ancillary devices and software.
DISCLAIMER
NOTICES REGARDING HARDWARE, SOFTWARE, DOCUMENTS AND SERVICES THAT ARE
AVAILABLE FROM WAVETREND:
In no event shall Wavetrend
®
and/or its respective suppliers be liable for any special, indirect or
consequential damages or any damages whatsoever resulting from loss of use, data or profits, whether in an
action of contract, negligence or other tortuous action, arising out of or in connection with the use or
performance of hardware, software, documents, provision of or failure to provide services, or information
available from Wavetrend
®
and/or our website http://www.wavetrend.net.
The documents published by Wavetrend
®
could include technical inaccuracies or typographical errors.
Changes are periodically added to the information herein. Wavetrend
®
and/or its respective suppliers may
make improvements and/or changes in the product (s) and/or the program (s) described herein at any time
without prior notice.
FCC STATEMENT
The ActivDuo devices described in this manual comply with Part 15 of the FCC Rules. Operation is subject to
the following three conditions:
The device may not cause harmful interference
The device must accept all interference received, including interference that may cause undesired operation.
The device is for commercial use only and intended for use in a confined area with an appropriate system
receiver
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.