User's Manual

USER MANUAL – ActivDuo Active RFID Tags
Configuration No. Wavetrend Technologies Ltd Master File Name Issue Date Page
00000-0000-150-1 User Manual ActivDuo Tag-00.8-UM-LT 3 DECEMBER 2008 37 OF 42
 Once the strap is fitted to the tag, secure the strap comfortably around the users wrist so that the tag
& strap cannot easily rotate around the wrist whilst being worn, but not too tight as to cause
discomfort for the wearer.
8.3 Attaching the TG1800-A to Objects for Asset Tracking Systems
8.3.1 Requirements
 An adjustable strap of the user’s choice. Examples could be any type of plastic, silicon or rubber
wrist strap that can fit through the TG1800-A tag’s side slots. Steel or metal straps can be used, but
take note of the important instruction below.
8.3.2 Fitment using Non-Metal Straps
 Thread the strap through one of the side slots on the tag, pass the strap either over the top of the tag
or underneath it and thread the strap through the other side slot on the tag.
 Once the strap is fitted to the tag, secure the strap tightly around the object so that the tag & strap
cannot rotate around the object during use.
8.3.3 Fitment using Steel/Metal Straps
 Thread the strap down through one of the side slots on the tag, pass the strap underneath the tag or
underneath it and thread the strap up through the other side slot on the tag.
 Once the strap is fitted to the tag, secure the strap tightly around the object so that the tag & strap
cannot rotate around the object during use.
 NOTE: Do not pass a metal strap over the top of the tag, this will seriously degrade the RF signal
from the tag and reduce the read range considerably, if not entirely.
8.4 Removing the TG1800-A
The tag can be removed from the wrist or asset by either unlocking the strap (if possible) or by cutting the
strap.
If the tag is be re-used by another person, clean and sterilize the tag by wiping it thoroughly using a liquid
chemical sterilization solution and follow the instructions for the sterilization solution to ensure complete
sterilization of the tag’s housing is achieved. Fit the tag to the new user as instructed above, using a new
wrist strap.