User's Manual

Link-It Active Tag 7 of 15
2.2.2 Tags
2.2.2.1 Normal Tag
The normal tag can be attached to assets, equipment, and people. The tag is used to perform the following
functions in the system.
• Transmit its unique pre-programmed ID at a pre-programmed time interval.
2.2.2.2 Tag with movement sensor
The tag with movement sensor can be attached to assets, equipment, and people. It is used to perform the
following functions in the system.
• Transmit its unique pre-programmed ID at a certain pre-programmed time interval.
• Transmit its unique pre-programmed ID each time that the tag senses movement.
2.2.2.3 Slimline Tag
The slimline tag can be attached to assets, equipment, and people. The tag is used to perform the following
functions in the system.
• Transmit its unique pre-programmed ID at a pre-programmed time interval.
2.3 PHYSICAL CHARACTERISTICS
2.3.1 Normal Tag and Tag with movement sensor
Both these tags have the same physical characteristics. The physical characteristics of tags are described in
the table below.
Figure 2: Active Tag
Parameter Specification
Size 61mm x 30mm x 9mm
Weight < 25gms
Type of material PVC (ultrasonically sealed) IP 65 rating
Table 4: Physical Characteristics of Normal and Movement Tags