User's Manual

Link-It Active Tag 14 of 15
• Alarm Column : Display alarm status of the tag
• Program Date Column : Display the date on which the tag has been programmed.
• Type Status Column : Displays the tag type.
•
Read Tags
: Displays a list of all the tags currently being read by the programmer.
The following paragraph describes the typical programming sequence for a tag.
• Install the Programming software by running “setup.exe” on disk 1.
• Connect the Programmer to communications port 2 of the PC.
• Run the Programming Software.
• Enter the 10 digit unique ID for the tag in the “Tag ID Number” box.
• Select all other options.
• Ensure that the tag is correctly placed on the programmer.
• Press the Program button.
• Follow Instructions on the screen.
• Repeat for next tag. (No need to enter next ID if the “Auto Increment” option is checked)
5.2 INSTALLATION OF THE TAGS
5.2.1 Normal Tags
This type of tag is used in a variety of tagging applications. Depending on the application, tags are attached to
equipment with glue, epoxy, velcro or double sided tape.
5.2.2 Tag with movement sensor
The movement tag is used in applications where slight movement of equipment needs to be monitored. . De-
pending on the application, tags are attached to equipment with glue, epoxy, velcro or double sided tape.
5.2.3 Slimline Tag
The slimline tag is normally used in personnel tagging application as well as laptop tagging applications. A
slimline tag bracket can be used to attach the slimline tag to personnel, the tag can however be kept in a per-
sons pocket or carried by hand. The slimline tag is attached to laptops by means of double-sided tape, velcro,
or glue.