User's Manual

Link-It Active Tag 4 of 15
1 SCOPE
1.1 IDENTIFICATION
The Link-It Active Tag (Sometimes referred to as the tag) is manufactured in two different types of packages
to suite various applications. These applications include asset management, asset protection, stock monitor-
ing, fleet management, and access control for people. The system can be used in a very wide range of envi-
ronments, including workplaces, medical facilities, educational establishments, warehouses, receiving and
despatch areas, parking lots and for many security applications, depending on the interfaces required.
1.2 PRODUCT OVERVIEW
Parameters:
•Time-Interval between transmissions.
•Identification Number.
5 - 10 Meter
Figure 1: Tag Block Diagram
The tag perform the following functions:
• Transmit ID at pre-set time-intervals.
• Accepts new parameters when being reprogrammed with a tag programmer.
• Depending on the environment in which the tags are being used, and the type of tag, it can transmit up
to a range of 10 meters.
1.3 DOCUMENT OVERVIEW
This document is intended for use by users and system vendors of the Link-It Tagging System. Operational
details of the tag are described.
• Chapter 2 describes the performance parameters of the tag. Operational, functional and physical char-
acteristics of the tag are explained.
• Chapter 3 describes the interface details of the tag. Software interfaces are explained.