User Manual

135188 V1.1 REAL TIME RESOURCE CONTROL 9 JANUARY 2001 Page 2 of 3
Link-it™
Product Information Sheet
Applications:
Link-it™ Tags can be mounted on a variety of items. Where permanent fixing is
required, VHB double-sided tape is used.
Specification:
Environmental
Operating temperature -10º C to +60º C
Storage temperature -20º C to +70º C
Humidity 5% to 90% (non condensing)
Physical
Size 61mm x 30mm x 9mm (Domino Enclosure)
Weight 15 grams (excluding antenna)
Colour Grey (Clariant 04-600 2%)
Type of material PVC (ultrasonically sealed) IP 65
RF Specifications
T
x
Frequency
433.92Mhz
±
10MHz
Power Output -14 dBm, 72 db µV, 4300 µV/m, 38µW
Modulation OOK
Bandwidth 3 MHz
Stability Loosely coupled Saw
Electrical Specifications
Power Internally powered Lithium Battery
Range Options
Domino Tag (without external antenna) Approximately 2.5 Meters
Domino Tag (with external antenna) Approximately 6 Meters
Certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
device generates, uses, and can radiate radio frequency energy and, if installed and
used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to radio or
television reception, the user is encouraged to try to correct the interference by one or
more of the following measures: