Specifications

User Manual 301/302
Figure 3.28a Multi Sequence Table Editor with 3 sequences
Modify the Multi Sequence Table as you like but remember that it was
specified earlier in this example that you are going to use up to 4
sequences. The example above (Figure 3.28a)will generate
sequences 3, 1 and 2 in this order.
Tip
Notice that sequences can not be repeated in this macro, so if you
need to repeat a sequence more than once, specify a larger number
of Edited Sequences and program a sequence as shown in the
example below (Figure 3.28b)
Figure 3.28b Multi Sequence Table Editor with 7 sequences and repeated
sequences
After you have completed your sequence table, click Download to
transfer the table to the Model 302, then click on Store & Close to
remove the dialog box from the screen. To turn on the sequence
generator, go back to the Instrument Control Panel, turn on the output
Configuring The Instrument
72