Specifications

User Manual 301/302

Figure 3.22, Sequence Table Download Format

There are a few things to consider when you prepare sequence tables

for the fast download format:

1. Data for each step is fixed and is comprised of 5 bytes

The number of bytes in a complete sequence table must divide by

6. The Model 301/302 has no control over data sent to its

sequence table buffer during binary block downloads. Therefore,

wrong data and/or incorrect number of bytes will cause erroneous

sequence setting.

Using WaveWiz to

Generate

Sequences

Downloading

Segments

Segments are built and downloaded in turn to the 301/302 using

WaveWiz. Valid Waveforms can be waveforms using any of the

previously discussed methods. Prior to downloading the waveform, it

is necessary to set the segment number to where the waveform will be

sent. This is done using the segment control window which is turned

on by selecting “view segment window” in the view pull down menu.

Select the segment number by entering that number in the box, then

clicking on the Sel button.

Once the required waveform is defined, download it to the selected

segment by clicking on the

button on the toolbar. Repeat this

process for every segment required.

Selecting Number

of Sequences

In WaveWiz, use the sequence button on the sequence tab in the

Instrument Control Panel. The sequence table pop-up menu appears.

Configuring The Instrument