Specifications

User Manual 301/302
TRACe #<header><binary_block>
Purpose
This command will download waveform data to the 302 memory. The Loading Arbitrary Waveforms section
of this manual descries how to use this command in greater details.
TRACe:DEFine <segment_number>,<length>
Purpose
This command will define waveform segments and their relative length. Waveform data can be loaded into
segments only after using this command.
• <segment_number> numeric value will set the selected segment
• <length> numeric value will assign length to the above selected segment
TRACe:DELete <segment_number>
Purpose
This command will delete a segment.
• <segment_number> numeric value will select the segment number that will be deleted
TRACe:DELete:ALL
Purpose
This command will delete all segments and will clear the entire waveform memory.
TRACe:SELect <segment_number>
Purpose
This command will select the active waveform segment for the output.
• <segment_number> numeric value will set the active waveform segment number
TRACe:SELect?
Response
The 302 will return the active segment number.
SEQuence:MODE SSEQuence | MSEQuence
Purpose
This command will select the sequence mode.
• <SSEQuence> will select the single sequence mode
• <MSEQuence> will select the multi sequence mode
SEQuence:MODE?
Response
The 302 will return the SSEQ, or MSEQ depending on the present sequence mode setting.
SSEQuence:ADVance AUTOmatic | STEP | SINGle
Purpose
This command will select the single-sequence advance mode.
SCPI Command Reference
104