Specifications

User Manual 301/302

OUTPut:SYNC:POSition <position>

Purpose

This command will program the 302 SYNC position. This command is active in arbitrary (USER) mode only.

• <position> will set the SYNC position in waveform points

OUTPut:SYNC:POSition?

Response

The 302 will return the present SYNC position value.

OUTPut:SYNC:WIDTh <width>

Purpose

This command will program the width of the SYNC pulse. This command is active only after PULSe was

selected as the SYNC source.

• <width> will set the SYNC width

OUTPut:SYNC:WIDTh?

Response

The 302 will return the present SYNC width value

SCPI Command Reference