Specifications

User Manual 301/302
VOLTage?
Response
The 302 will return the present amplitude value. The returned value will be in standard scientific format (for
example: 100mV would be returned as 100E-3 – positive numbers are unsigned).
VOLTage:OFFSet <offs>
Purpose
This command programs the amplitude offset of the output waveform. The offset is calibrated when the
source impedance is 50Ω.
• <offs> numeric value that sets the amplitude offset
VOLTage:OFFSet ?
Response
The 302 will return the present offset value. The returned value will be in standard scientific format (for
example: 100mV would be returned as 100E-3 – positive numbers are unsigned).
SINusoid:PHASe <phase>
Purpose
This command programs start phase of the standard sine waveform. This command has no affect on
arbitrary waveforms.
• <phase> numeric value that sets the start phase
SINusoid:PHASe?
Response
The 302 will return the present start phase value.
TRIangle:PHASe <phase>
Purpose
This command programs start phase of the standard triangular waveform. This command has no affect on
arbitrary waveforms.
• <phase> numeric value that sets the start phase
TRIangle:PHASe?
Response
The 302 will return the present start phase value.
SQUare:DCYCle <duty_cycle>
Purpose
This command programs duty cycle of the standard square waveform. This command has no affect on
arbitrary waveforms.
• <duty_cycle> numeric value that sets the duty cycle value
SCPI Command Reference
91