Installation Guide

15
Details are as follows:
Power
 2.5mm DC Jack to Power up the unit using Meanwell supply (12V, 3.34A) included in package.
CDU/TSU ports
 RJ45 Ports marked CDU and TSU can be used to drive Display devices and HTSU over RS485
protocol (Active Hub will be needed).
Audio
 Two RJ45 ports for connecting 8 Ohm speakers.
 Volume Knob for controlling volume level.
Debug port (DB-9 Connector)
 A standard FTDI cable (RS232 to USB) can be plugged into this port for debugging purposes.
USB port
 One USB port can be used as required.
LAN port
 For providing internet or LAN connectivity to the unit.
LED indicators:
 Wavetec Logo with White Backlit LED that glows when unit is powered ON.