User's Manual

3
2. Configuration
Total Number of CDU
Connect at Hub
Wire Length (Meters)
CDU
Current
Text Color
Text
7
21
1.038Amp
Orange
8888
9
14
0.870Amp
Orange
8888
10
7
0.738Amp
Orange
8888
16
49
0.338Amp
Red
8888
15
28
0.490Amp
Green
8888
Note: CDU can connect with maximum wire length of 28 meter.
3. ID Change Procedure:
 First locate the ID Change Switch as highlight in the above picture & make sure all dip switches
should be at OFF Position.
 Now with the help of pointing thing press & hold this Switch for 3-5 seconds until the display
shows the ID of the CDU, after that release this switch.
 Now Press this switch again, you will observe the ID’s is incrementing on the display, Keep
pressing the switch till you get close to your desired ID. Now release and press for a brief period
for single increment till your desired ID has reached. Now stop pressing that switch. In 5 seconds
this will be stored as new ID.
 After few seconds the CDU will display startup messages and also show your set ID.