User's Manual

QC Guide of Active Hub
Jul. 13
19
Note:
Don’t need to test all ports on TSU network , one port test is fine.
How to Change TSU ID’s
Once inserted Following screen message will appear for few seconds:
After few seconds following message will appear:
TSU ID can be changed or configured by the following procedure:
Press button “1” and “2” together for few seconds or until following screen is appeared on TSU:
Press button “1” on TSU to increment the number of ID or Press button “5” to decrement the number of ID
Once ID number has been changed to desired ID number then press button “OK” on TSU.
The above selected ID will appear on Network Scanner TSU when we scan the network.
OLD TSU ID = 001
NEW TSU ID = 002
WAVETEC
eQ
www.WAVETEC.COM/EQ
TSU ID = 001
Ver : TSU 06-1-06
ALIVE TSUs ARE : 01.