Data Sheet

NEO-7 - Data Sheet
UBX-13003830 - R04 Early Production Information Labeling and ordering information
Page 24 of 26
9 Labeling and ordering information
9.1 Product labeling
The labeling of u-blox 7 GNSS modules includes important product information. The location of the product type
number is shown in Figure 6.
Figure 6: Location of product type number on u-blox 7 module label
9.2 Explanation of codes
3 different product code formats are used. The Product Name is used in documentation such as this data sheet
and identifies all u-blox 7 products, independent of packaging and quality grade. The Ordering Code includes
options and quality, while the Type Number includes the hardware and firmware versions. Table 13 below
details these 3 different formats:
Format Structure
Product Name PPP-GV
Ordering Code PPP-GV-T
Type Number PPP-GV-T-XXX
Table 13: Product Code Formats
The parts of the product code are explained in Table 14.
Code Meaning Example
PPP Product Family NEO
G Product Generation 7 = u-blox7
V Variant T = Timing, R = DR, etc.
T Option / Quality Grade Describes standardized functional element or quality grade such
as Flash size, automotive grade etc.
XXX Product Detail Describes product details or options such as hard- and software
revision, cable length, etc.
Table 14: part identification code
9.3 Ordering codes
Ordering No. Product
NEO-7M-0 u-blox 7 GNSS Module, ROM, 12x16mm, 250 pcs/reel
NEO-7N-0 u-blox 7 GNSS Module, Flash, TCXO, SAW, LNA, 12x16mm, 250 pcs/reel
Table 15: Product ordering codes for standard grade modules
Product changes affecting form, fit or function are documented by u-blox. For a list of Product Change
Notifications (PCNs) see our website.