User Guide

Hardware Specification
 2018 Microchip Technology Inc. DS50002751C-page 65
B.4 TARGET BOARD CONSIDERATIONS
The target board should be powered according to the requirements of the selected
device and the application.
The debugger does sense target voltage.
Depending on the type of debugger-to-target communication that is used, there are
some considerations for target board circuitry:
• Section 2.3.2 “Target Connection Circuitry”
• Section 2.3.5 “Circuits That Will Prevent the Debugger From Functioning”
Note: Stresses above those listed under “Absolute Maximum Ratings” in the
device’s data sheet may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at those or any
other conditions, above those indicated in the operation listings of this
specification, is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.