User Guide

MPLAB
®
PICkit™ 4 User’s Guide
DS50002751C-page 54  2018 Microchip Technology Inc.
FIGURE A-1: OPTIONS FOR MPLAB PICKIT 4
After setting the options, click Apply or OK. Also click the Refresh Debug Tool status
icon in the MPLAB X IDE dashboard display to update any changes made.
The possible option categories are:
• Memories to Program
• Debug
• Program
• Freeze Peripherals
• Power
• Programmer To Go (coming soon)
• Secure Segment
• Firmware
• Clock
• Communication
A.3.1 Memories to Program
Select the memories to be programmed into the target.
TABLE A-1: MEMORIES TO PROGRAM OPTION CATEGORY
Auto select memories and ranges Allow PICkit 4 to Select Memories - The debugger
uses your selected device and default settings to
determine what to program.
Manually select memories and ranges - You select
the type and range of memory to program (see
below.)
Configuration Memory Check to program configuration memory.
Boot Flash (always programmed in
debug mode)
Include configuration memory in the area(s) to be
programmed.
ID Check to program the User ID.
Program Memory Check to program the target program memory range
specified below.