User Manual
Enter the terminal, and input the line below:
sudowebiopi‐d‐c/etc/webiopi/config
Then, open the browser on your PC or cell phone, and enter the IP address of RPi and the port number:
8000 into the address bar. For example, input http://192.168.1.16:8000 ﴾the address can be changeable
according to your actual condition﴿. To login the website, you should enter your account and password. The
default account name is webiopi, and the original password is raspberry. When finished the steps above, if
you can enter the webpage WebIOPi Main Menu, it means the environment is configured well.
Under the terminal, press the keys Ctrl + C to end the program.
Step 2. Install and use mjpg‐streamer
This section describes the new function: camera, since the RPi can be connected with a camera. If you
