Data Sheet

CP2102
Rev. 1.1 5
2. Absolute Maximum Ratings
3. Global DC Electrical Characteristics
Table 1. Absolute Maximum Ratings
Parameter Conditions Min Typ Max Units
Ambient temperature under bias –55 — 125 °C
Storage Temperature –65 — 150 °C
Voltage on any I/O Pin or RST
with respect to GND –0.3 — 5.8 V
Voltage on V
DD
with respect to GND –0.3 — 4.2 V
Maximum Total current through V
DD
and GND — — 500 mA
Maximum output current sunk by RST
or any I/O pin — — 100 mA
Note: Stresses above those listed may cause permanent damage to the device. This is a stress rating only, and functional
operation of the devices at or exceeding the conditions in the operation listings of this specification is not implied.
Exposure to maximum rating conditions for extended periods may affect device reliability.
Table 2. Global DC Electrical Characteristics
V
DD
= 2.7 to 3.6 V, –40 to +85 °C unless otherwise specified.
Parameter Conditions Min Typ Max Units
Supply Voltage 3.0 3.3 3.6 V
Supply Current V
DD
= 3.3 V — 26 — mA
Supply Current in Suspend V
DD
= 3.3 V — 330 — µA
Specified Operating Temperature Range –40 — +85 °C
Table 3. UART and Suspend I/O DC Electrical Characteristics
V
DD
= 2.7 to 3.6 V, –40 to +85 °C unless otherwise specified.
Parameters Conditions Min Typ Max UNITS
Output High Voltage I
OH
=–3mA
I
OH
=–10µA
I
OH
=–10mA
VDD – 0.7
VDD – 0.1
—
—
—
VDD – 0.8
—
—
—
V
Output Low Voltage I
OL
=8.5mA
I
OL
=10µA
I
OL
=25mA
—
—
—
—
—
1.0
0.6
0.1
—
V
Input High Voltage 2.0 — — V
Input Low Voltage — — 0.8 V
Input Leakage Current — 25 50 µA