Data Sheet

9/24/2015 ARPI600WaveshareWiki
http://www.waveshare.com/wiki/ARPI600 14/18
example, modify to “1” for testing the conversion value from Pin AD1 ﴾Pin T_A1﴿, and
modify to “2” for testing the conversion value from Pin AD2 ﴾Pin T_A2﴿, and so on, until
to “10” for testing the conversion value from Pin AD10 ﴾T_A10﴿﴿.
After completing the operation described above, press the keys Ctrl+X, and select the
option Y to save the modification.
2. Execute the following code under the terminal:
sudomake
sudo./tlc1543
Now, the modification is in effect.
Interface description
Interface over view
The default relationship between Arduino digital control pins and Raspberry Pi IOs is shown in the
table. The relationship between Arduino digital control pins and Raspberry Pi IOs
APRI600 IO of Raspberry Pi B+
D0 P_RX
D1 P_TX
D2 P0
D3 P1
D4 P2
D5 P3
D6 P4
D7 P5
D8 P6
D9 P7
D10 CE0
D11 MOSI
D12 MISO
D13 SCK
The jumper pins D11, D12 and D13 on the module are used for configuring the ARPI600. And
these pins should be shorted by the 0Ω resistances.