User Manual

AlphaBot User Manual

Enter the terminal, and input the line below:

sudo webiopi -d -c /etc/webiopi/config

Then, open the browser on your PC or cell phone, and enter the IP address of RPi

and the port number: 8000 into the address bar. For example, input

http://192.168.1.16:8000 (the address can be changeable according to your actual

condition). To login the website, you should enter your account and password. The

default account name is webiopi, and the original password is raspberry. When

finished the steps above, if you can enter the webpage WebIOPi Main Menu, it

means the environment is configured well.

Under the terminal, press the keys Ctrl + C to end the program.

Step 2. Install and use mjpg-streamer

This section describes the new function: camera, since the RPi can be connected

with a camera. If you application do not need this function, please jump to the next

section.

share awesome hardware