User Manual

cd~/RPi_Relay_Board/Webiopi 
pi@raspberrypi~/RPi_Relay_Board/Webiopi$sudowebiopi‐d‐cconfig 
Then, open the browser on your PC or cell phone, and enter the IP address of RPi into the address bar and
end with the port number: 8000. Or you can reload the webpage.
If you still cannot enter this webpage, we recommend you to use the Chrome browser or the Firefox
browser. Furthermore, please make sure the current directory of Raspberry Pi is
~/RPi_Relay_Board/Webiopi
, and there should be a file index.html under this directory. And then, input the
code
sudowebiopi‐d‐cconfig
to enter the index.html. Or else, you will go to the WebIOPi Main Menu webpage.
After entering this webpage, you can control the relays by clicking the controls of different relay channels
on the webpage.
Resources
Schematic
Demo Code
Libraries Installation for RPi
WebIOPi‐0.7.1
or send emails to [e-mail] ﴾not fast enough but please be patient﴿