User Manual

Set as:
Select Expand Filesystem.
Boot Option ‐> Desktop Autologin ﴾may differ depending on Raspbian revision﴿
2. Copy the driver ﴾choose the driver according to your OS﴿ into your OS then Run the following
commands:
tarxvfLCD‐show‐YYMMDD.tar.gz 
cdLCD‐show/ 
This toggles the mode to LCD display: ./LCD35‐show 3. After system rebooting, the RPi LCD is ready to use.
Method 2. Using Ready‐to‐use image
The image file with pre‐installed driver is located in the IMAGE directory of the CD, or you can download it
from #Image. Extract the .7z file and you will get an .img file. Write the image to your micro SD card ﴾How
to write an image to a micro SD card for your Pi? See RPi Image Installation Guides for more details﴿. Then
insert the card to your Pi, power up and enjoy it.
Toggle between LCD and HDMI display
Once this LCD is enabled, meanwhile the default settings for HDMI are changed. If you want to use another
HDMI monitor, please run the following command:
cdLCD‐show/ 
./LCD‐hdmi 
This toggles the mode to LCD display:
./LCD35‐show
Screen orientation settings
After touch driver installed, the screen orientation can be set by these commands:
0 degree rotation
cdLCD‐show/ 
./LCD35‐show0 
90 degree rotation
cdLCD‐show/ 
./LCD35‐show90 
180 degree rotation