User - Manual

OV5640 Camera Board (C) User Manual
Version: V1.0 Dec.12 2017 6
More detailed information about SCCB protocol see in datasheet
USAGE DESCRIPTION
This module provides STM32F407\429\746 routines, here are demonstration examples for
Waveshare Open746I-C development board:
1. Connect the module to DCMI port of the development board, connect USB-to-serial
adapter to USART1 serial port on the board and to USB port on computer.
2. Open UartDisplay (camera data receiving software) on your computer, set number of port
and its rate 921600, and the open the port.
3. Download the program into the board, push RESET button and after some initialization
period it shows following data:
4. Push WAKE UP button and the board will start to sent continuously JPEG images via serial
port and UartDisplay will show them.