Data Sheet

Product Specification
Ver 1.2  17 / 43
(15) Partial Display Refresh Command (R16h)
Action W/R C/D D7 D6 D5 D4 D3 D2 D1 D0
Partial Display Refresh
0 0 0 0 0 1 0 1 1 0
0 1 DFV_EN X[8]
0 1 X[7] X[6] X[5] X[4] X[3] 0 0 0
Y[8]
0 1 Y[7] Y[6] Y[5] Y[4] Y[3] Y[2] Y1] Y[0]
0 1 W[8]
0 1 W[7] W[6] W[5] W[4] W[3] W[2] W[1] W[0]
L[8]
0 1 L[7] L[6] L[5] L[4] L[3] L[2] L[1] L[0]
While user sent this command, driver will refresh display (data/VCOM) base on SRAM data and LUT.
Only the area (X,Y, W, L) would update, the others pixel output would follow VCOM LUT After display refresh command, BUSY_N
signal will become “0”.
Note: X and W should be the multiple of 8.
DFV_EN: data follow VCOM function on display area.
DFV_EN=1: Only effective in B/W mode, if pixel from “New data” SRAM equal to “Old data” SRAM on display area, this pixel output
would follow VCOM LUT.
DFV_EN=0: Data doesn’t follow VCOM LUT.
This command only active when BUSY_N = “1”.
(16) VCOM LUT (LUTC) (R20H)
This command builds Look-up Table for VCOM
(17) W2W LUT (LUTWW) (R21H)
This command builds Look-up Table for White-to-White.
(18) B2W LUT (LUTBW/LUTR) (R22H)
This command builds Look-up Table for Black-to-White.
(19) W2B LUT (LUTWB/LUTW) (R23H)
This command builds Look-up Table for White - to- Black.
(20) B2B LUT (LUTBB / LUTB) (R24H)
This command builds Look-up Table for Black - to- Black.
.
2.7" e-Paper (B)