Data Sheet

Product Specification
Ver 1.2  16 / 43
In B/W/Red mode, this command writes “B/W” data to SRAM.
Partial update location and area
Note: X and W should be the multiple of 8.
(14) Partial Data Start transmission 2 register (R15h)
Action
W/
R
C/
D
D7 D6 D5 D4 D3 D2 D1 D0
Partial Data
Start
transmissio
n 2
0 0 0 0 0 1 0 1 0 1
0 1 - - - - - - - X[8]
0 1 X[7] X[6] X[5] X[4] X[3] 0 0 0
- - - - - - - Y[8]
0 1 Y[7] Y[6] Y[5] Y[4] Y[3] Y[2] Y[1] Y[0]
0 1 - - - - - - - W[8]
0 1 W[7] W[6] W[5] W[4] W[3] 0 0 0
- - - - - - - L[8]
0 1 L[7] L[6] L[5] L[4] L[3] L[2] L[1] L[0]
0 1 Kpixel1 Kpixel2 Kpixel3 Kpixel4 Kpixel5 Kpixel6 Kpixel7 Kpixel8
0 1 .. .. .. .. .. .. .. ..
0 1
Kpixel(n-7
)
Kpixel(n-6
)
Kpixel(n-5
)
Kpixel(n-4
)
Kpixel(n-3
)
Kpixel(n-
2
Kpixel(n-1
)
Kpixel(n
)
The command define as follows: The register is indicates that user start to transmit data, then write to SRAM. While data transmission
complete, user must send command 11H. Then chip will start to send data/VCOM for panel.
In B/W mode, this command writes “NEW” data to SRAM.
In B/W/Red mode, this command writes “RED” data to SRAM.
Partial update location and area
Note: X and W should be the multiple of 8.
.
2.7" e-Paper (B)